800.431.0101

• Home
• Search
• Contact
• Help&Info

Standard Profiles

Type 22B (Outward Expansion) Inflatable Profiles

When the ID or OD is too small for a standard Pneuma-Seal cross section, fully molded inflatable bladders (with a mating housing) may be employed. ** Note: each bladder is designed for a specific shaft (either ID or OD) diameter. These diameters are located in the Gap and Gap(mm) columns. ** Click on a specific profile number for further details (sign in required).

Non-Fabric

Profile	W	W(mm)	H	H(mm)	Gap*	Gap(mm)*
PR16436-4	1.438	36.53	1.500	38.10	1.500	38.10
PR16436-15	1.788	45.42	0.675	17.15	1.875	47.63
PR16436-16	1.870	47.50	0.504	12.80	2.000	50.80
PR16436-18	1.926	48.91	12.000	304.80	2.000	50.80
PR16436-7	2.141	54.38	1.750	44.45	2.250	57.15
PR16436-19	2.200	55.88	12.000	304.80	2.300	58.42
PR16436-17	2.281	57.94	1.500	38.10	2.385	60.58
PR16436-8	2.375	60.33	1.750	44.45	2.500	63.50
PR16436-20	2.475	62.87	12.000	304.80	2.600	66.04
PR16436-10	2.813	71.45	2.000	50.80	3.000	76.20
PR16436-11	3.062	77.77	2.250	57.15	3.200	81.28
PR16436-12	3.250	82.55	2.500	63.50	3.500	88.90

*Note: Gap is based on normal use and will vary depending upon the application. Please contact Pawling for further information.

Please register with us. Registration will grant you access to technical drawings and other detailed information related to our standard profiles.